Proportional pressure regulator for pipe installation and cabinet assembly

service units - gauges - control technology > Precision pressure regulator - Proportional pressure regulator > Proportional pressure regulator for pipe installation and cabinet assembly

已选总价:￥0.00
已选数量:0件

所有费用均已包含增值税，不含运费。运费详情请参阅运费指导书。

产品详情与编号

序号	产品编号	名称	Weight	Pressure gauge connection	Thread	Max. permitted pressure on the secondary side* [bar]	Control range [bar]	flow [l/min]	Design	Input signal	售价
	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部
1.0	DRPD 18-10-E20		270g / pc.	-	G 1/8"	13	0 - 10	35	for DIN-rails	4 - 20 mA	￥3890.56
2.0	DRPD 18-4-E20		260g / pc.	-	G 1/8"	11	0 - 4	35	for DIN-rails	4 - 20 mA	￥3890.56
3.0	DRPE 14-10-E20		800g / pc.	G 1/8"	G 1/4"	13	0 - 10	530	Standard (with mounting brackets)	4 - 20 mA	￥6002.56
4.0	DRPD 18-6		270g / pc.	-	G 1/8"	11	0 - 6	35	for DIN-rails	0 - 10 V	￥3890.56
5.0	DRPD 18-1		260g / pc.	-	G 1/8"	2	0 - 1	35	for DIN-rails	0 - 10 V	￥3890.56
6.0	DRPE 14-1-E20		800g / pc.	G 1/8"	G 1/4"	2	0 - 1	530	Standard (with mounting brackets)	4 - 20 mA	￥6002.56
7.0	DRPD 18-20-E20		280g / pc.	-	G 1/8"	24	0 - 20	35	for DIN-rails	4 - 20 mA	￥6002.56
8.0	DRPD 18-6-E20		270g / pc.	-	G 1/8"	11	0 - 6	35	for DIN-rails	4 - 20 mA	￥3890.56
9.0	DRPE 14-4		800g / pc.	G 1/8"	G 1/4"	11	0 - 4	530	Standard (with mounting brackets)	0 - 10 V	￥6002.56
10.0	DRPD 18-20		280g / pc.	-	G 1/8"	24	0 - 20	35	for DIN-rails	0 - 10 V	￥6002.56
11.0	DRPE 14-6		800g / pc.	G 1/8"	G 1/4"	11	0 - 6	530	Standard (with mounting brackets)	0 - 10 V	￥6002.56
12.0	DRPE 14-4-E20		800g / pc.	G 1/8"	G 1/4"	11	0 - 4	530	Standard (with mounting brackets)	4 - 20 mA	￥6002.56
13.0	DRPD 18-1-E20		270g / pc.	-	G 1/8"	2	0 - 1	35	for DIN-rails	4 - 20 mA	￥3890.56
14.0	DRPD 18-4		260g / pc.	-	G 1/8"	11	0 - 4	35	for DIN-rails	0 - 10 V	￥3890.56
15.0	DRPD 18-10		260g / pc.	-	G 1/8"	13	0 - 10	35	for DIN-rails	0 - 10 V	￥3890.56
16.0	DRPE 14-6-E20		800g / pc.	G 1/8"	G 1/4"	11	0 - 6	530	Standard (with mounting brackets)	4 - 20 mA	￥6002.56
17.0	DRPE 14-1		800g / pc.	G 1/8"	G 1/4"	2	0 - 1	530	Standard (with mounting brackets)	0 - 10 V	￥6002.56
18.0	DRPE 14-10		800g / pc.	G 1/8"	G 1/4"	13	0 - 10	530	Standard (with mounting brackets)	0 - 10 V	￥6002.56

注：本公司对上述参数保有最终解释权，如若变动，恕不通知。

Proportional pressure regulator for pipe installation and cabinet assembly

Application: The proportional pressure regulator regulates the pressure on the secondary side proportional to an electric input signal (0 - 10 V or 4 - 20 mA). For a remote-controlled pressure regulator of the type DRi or FDRi 03, based on the lower flow of the regulator for DIN-rail assembly, it is recommended to use this as pilot regulator fitted in the cabinet.
Materials: Body: aluminium, brass, plastic, seals: NBR
Media: filtered, dried compressed air, non-toxic and non-inflammable gases
Temperature range: -10°C to max. +60°C
Input signal: 0 - 10 V or 4 - 20 mA
Power supply: 15 - 24 V DC (80 - 325 mA) (Type DRPD: max. 250 mA)
Protection class: IP 65** (type DRPD: IP 00)
Connection: M12 push in connector (4 pole) (DRPD type: cable clips)
Linearity: 0.2 % from end value
Repeatability: 0.2 % from end value
Hysteresis: 0.5 % from end value
Accuracy: 0.5 % from end value
Exhaust performance: approx. 190 l/min (Type DRPD: approx. 35 l/min)
*the pressure sensor on the secondary side can be damaged above this pressure, **not M12 plug

Catalogue page Pneumatic Atlas 8 (Page 550)

Technical documentation
All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.