High pressure ball valves with electric rotary actuators (industrial version), up to PN 500
  Ball valve:   Materials:  housing: Zinc plated steel, cone: Hard chrome-plated brass (DN 32 to 50: Hard chrome-plated steel), ball seal: POM, selector shaft seal: NBR  
Temperature range:  -10°C to max. +80°C  
Operating range:  Hydraulic oil, heating oil (water only after release by us)  
Optional:  Ball valve made of stainless steel 1.4571 
-ES  Rotary actuator:  Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding.  
Temperature range:  -10°C to max. +70°C  
Voltage:  Type 24: 12 - 24 V AC/DC, 
type 220: 85 - 240 V AC/DC (drives can be operated with DC and AC).  
Protection class:  IP 65  
Power-on time:  75 %  
Regulating time:  8 to 12 seconds  
Optional:  Regulating time 140 sec. (only for actuator size 2) 
-140, "Battery Safety Return" for emergency closing NC (standard configuration) or emergency opening NO (switch via jumper) if there is a power failure 
-BSR  Warning:  In case of high media temperatures, the actuator must be cooled if necessary! 
 **Installation length, stainless steel: 113 mm
*Dimensions and replacement actuators can be found further on in this chapter.
 
 Catalogue page Pneumatic Atlas 8 (Page 483)
Suitable accessories:
Hydraulic threaded reductions with cylindrical male and female thread 
Double nipple with inch-thread (60° conical hose nipple), up to 400 bar 
Precision-hydraulic tube - seamless, EN 10305-4 (DIN 2445/2) 
Control cable, flexible, YSLY-JZ 
PTFE sealing tape, standard quality 
Seal flax 
Sealing paste for hemp or flax seals 
Hydraulic gaskets with NBR inserts (self-centring) 
Loxeal thread seals 
Straight screwed connections, Whitworth pipe thread (BSPP) 
All technical data are to be understood as non-binding reference values.
 prices given plus VAT
 Catalogue page Pneumatic Atlas 8 (Page 483)
Suitable accessories:
Hydraulic threaded reductions with cylindrical male and female thread 
Double nipple with inch-thread (60° conical hose nipple), up to 400 bar 
Precision-hydraulic tube - seamless, EN 10305-4 (DIN 2445/2) 
Control cable, flexible, YSLY-JZ 
PTFE sealing tape, standard quality 
Seal flax 
Sealing paste for hemp or flax seals 
Hydraulic gaskets with NBR inserts (self-centring) 
Loxeal thread seals 
Straight screwed connections, Whitworth pipe thread (BSPP) 
All technical data are to be understood as non-binding reference values.
 prices given plus VAT
 Click here in order to show prices with VAT included.